RD4XIN
 |
- Indoor Dedicated Outdoor Air System (DOAS)
- Provides 100% Outdoor Air
- Typical Airflow Range: 1000-4,400 cfm
- AHRI 1060 Certified Core – Four L125-G5
- Two Direct-Drive Double Width Double Inlet (DWDI) Centrifugal Blowers, with Premium Efficiency Inverter-Rated 2HP motors
- Available in single or three phase with multiple voltage options including 575V
- Multiple options for post-treatment of fresh airstream
- Split system - condenser, heat pump, or chilled/hot water feed - field supplied
- Substantial airflow orientation flexibility
|
Standard Features:
- Utilizes RenewAire's exceptional static plate energy exchange core
- AHRI certified performance data for efficiency and cross leakage
- Ten year core performance warranty
- Suitable for restroom exhaust
- DX, chilled water, hot water, dual circuit, heat pump coil options
- Enthalpy controlled energy recovery bypass (motorized face and bypass dampers)
- Completely automatic operation or integration into a Building Management System
- Factory supplied and mounted Variable Frequency Drives (VFDs), one for each airstream
- Hinged and latched access door to ERV core with airtight outdoor exposure compression seals
- Built-in pressure ports with captive plugs allowing cross-core pressure measurement and accurate airflow measurement
- Second similarly constructed access door allows access to blower compartment and all other internal components
- One inch thick dense fiberboard insulation with scrimmed foil facing– washable, durable and easy to maintain – no loose insulation fibers to break off and enter the airstreams
- Double-wall construction in fresh airstream compartments
- Motorized isolation dampers, OA, EA or both airstreams
- Factory installed, integral line voltage disconnect (non-fused) and onboard 24VAC power
- Eight total, MERV 8, 2” pleated, 20”x20” nominal size filters (four for each airstream)
- Field configurable blower and inlet openings for optimum job site flexibility
- UL tested flammability and smoke generation that meets NFPA 90A and 90B test standards for commercial applications
- Fork lift holes in integral base rail
Available Options:
- Coil Options
- Direct expansion
- Heat pump
- Two circuit refrigerant coil option
- Hot water
- Heating/cooling coil (for seasonal changeover)
- Hot water coil added to DX/HP/CW coils
- Dewpoint control
- Fused disconnect
- Full double-wall construction
- Factory mounted Filter Alarms (2)
|
|
